Click image to view full size image
1-Company Introduction
Solidkey Petroleum ,Machinery Co.,Ltd specialize in research and development of drilling equipments. We are manufacturing and marketing with senior technical staffs for many years. The main products are tricone drilling bit ,hole openers ,PDC bit,tricone cutters and other drilling tools .
2- Product Information
Size:12 1/4 inch
IADC Code: 637G
Bearing Type: Elastomer seal bearing
Application: hard formations like granite, basalt......
3-Package
| First Digit(1~8): |
| -1,2, and 3 designate STEEL TOOTH BITS with 1 for soft,2 for medium and 3 for hard formations. -4,5,6,7 and 8 designate TUNGSTEN CARBIDE INSERT BITS for varying formation hardness with 4 being the softest and 8 the hardest. |
| Second Digit(1~4): |
| -1,2,3, and 4 are further breakdown of formation with 1 being the softest and 4 the hardest . |
| Third Digit(1~7): This digit will classify the bit according to bearing/seal type-see information on different bearing types-and special guage wear protection as follows: |
| -1. Standard open bearing roller bit. -2. Standard open bearing roller bit,air-cooled. -3. Standard open bearing roller bit with gauge protection which is defined as carbide inserts in the heel of the cone. -4. Sealed roller bearing bit. -5. Sealed roller bearing bit with gauge protection on heel of cones. -6. Journal sealed bearing bit. -7. Journal sealed bearing bit with gauge protection on heel of cones. |
| Feature Code: The following letter codes are used in the fourth digit position to indicate additional features: |
| A. Air Application R. Reinforced Welds C. Center Jet S. Standard Steel Tooth D. Deviation Control X. Chisel Insert E. Extended Jet Y. Conical Insert G. Extra Gage Protection Z. Other Insert Shape J. Jet Deflection |
tricone rock bits for well drilling
